Differences

This shows you the differences between two versions of the page.

--- ee:nodered [2020/10/19 19:59] – FKR@staff.hsrw
+++ ee:nodered [2020/10/19 21:01] (current) – FKR@staff.hsrw
@@ Line 6: / Line 6: @@
 https://www.youtube.com/watch?v=aHiAVTuKL7M
+Node-Red installieren:
 <code>
 sudo apt-get update
 sudo apt-get upgrade
-sudo apt-get install build-essential
+sudo apt-get install build-essential curl npm
-sudo apt-get install curl
+bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered)
 </code>
-Node-Red installieren:
+Dasboard installieren:
+<code>
+node-red-stop
+cd ~/.node-red
+npm install node-red-dashboard
+</code>
-sudo apt-get install build-essential
-bash <(curl -sL https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/update-nodejs-and-nodered)
-Mosquito installieren:
-sudo apt install mosquitto mosquitto-clients sudo systemctl enable mosquitto
+Mosquito installieren:
+<code>
+sudo apt install mosquitto mosquitto-clients
+sudo systemctl enable mosquitto
 sudo systemctl status mosquitto
-Mosquito testen
+</code>
+Mosquito testen:
+<code>
 Subscribe im Terminal 1
-mosquitto_sub -h localhost -t “test/message”
+mosquitto_sub -h localhost -t "test/message"
 Publish im Terminal 2
-mosquitto_pub -h localhost -t “test/message” -m “Hello, world”
+mosquitto_pub -h localhost -t "test/message" -m "Hello, world"
+</code>
+Node-red starten:
+<code>
+node-red-start
+<code>
 Code für ESP
 https://github.com/Edistechlab/Relais-per-MQTT-schalten/blob/master/MQTT_Output.ino