Differences

This shows you the differences between two versions of the page.

--- ee:pcbuvmasks [2024/01/12 10:46] – FKR@staff.hsrw
+++ ee:pcbuvmasks [2024/12/12 14:30] (current) – FKR@staff.hsrw
@@ Line 24: / Line 24: @@
 <imgcaption PrintExposureMask|Print exposure mask>{{:ee:PrintExposureMask.png?400}}</imgcaption>
-Printing multiple times to the same foil can be hard. Normal (laser) printers are not designed for this tasks, so there will probably be some wasted foils.
+Printing multiple times to the same foil can be hard. Normal (laser) printers are not designed for this tasks, so there will probably be some wasted foils. Tip: Cool the foil directly after printign by laying it on a metal surface. Also remove all paper from the printer before printing on the foil.
 The procedure for the top side of the board is the same. The mask for the top side is generated with layers 1, 17 and 18 enabled. **Important:** It is essential to mirror the layout, there is an extra option for this on the print menu.