Differences

This shows you the differences between two versions of the page.

--- ee:rode_nt1 [2020/03/06 14:19] – 19923@students.hsrw
+++ ee:rode_nt1 [2020/03/10 15:04] (current) – 19923@students.hsrw
@@ Line 1: / Line 1: @@
 ===== RØDE NT1 Condenser Microphone =====
-==== Specs ====
+{{ http://www.rode.com/microphones/nt1 | Official Link }}
+==== Specs: ====
 • Large Diaphragm Cardioid Condenser Microphone.
-• Gold-plated 1" capsule which employs patented Lyre technology from Rycote
-• Black metal housing with scratch-resistant ceramic coating
-• Extremely low self-noise (4.5 dBA)
-• Incl. Special SMR shock mount SMR with detachable stainless steel pop shield and dust bag
-• Made in Australia
-• 10-Year warranty for registered users (special warranty between producer and purchaser)
-• Directional characteristic: Cardioid
-• Frequency range: 20-20000 Hz
-• Output impedance: 100 Ohm
-• Sensitivity: 35.0 mV/Pa
-• Equivalent noise level: 4.5 dBA (according to IEC651), Max
-• Output level: +8.0 DBu (1 kHz, 1% THD, 1 kOhm load)
-• Dynamic range: 128 dB
-• Peak SPL: 132 dB
-• Signal to noise ratio: 90 dBA (according to IEC651)
-• Requires phantom power 24 V / 48 V
-• Port: 3-pin XLR
-• Dimensions (diameter x length): 50 x 190 mm
-• Weight: 395 g
-==== Links ====
+• Gold-plated 1" capsule which employs patented Lyre technology from Rycote.
-http://www.rode.com/microphones/nt1
+• Black metal housing with scratch-resistant ceramic coating.
+• Extremely low self-noise (4.5 dBA).
+• Incl. Special SMR shock mount SMR with detachable stainless steel pop shield and dust bag.
+• 10-Year warranty for registered users (special warranty between producer and purchaser).
+• Directional characteristic: Cardioid.
+• Frequency range: 20-20000 Hz.
+• Output impedance: 100 Ohm.
+• Sensitivity: 35.0 mV/Pa.
+• Equivalent noise level: 4.5 dBA (according to IEC651), Max.
+• Output level: +8.0 DBu (1 kHz, 1% THD, 1 kOhm load).
+• Dynamic range: 128 dB.
+• Peak SPL: 132 dB.
+• Signal to noise ratio: 90 dBA (according to IEC651).
+• Requires phantom power 24 V / 48 V.
+• Port: 3-pin XLR.
+• Dimensions (diameter x length): 50 x 190 mm.
+• Weight: 395 g.
+• Made in Australia.
+{{ ee:audio:rode_nt1.jpg?direct }}
+{{ ee:audio:rode_nt1_2.jpg?direct }}
+{{ ee:audio:rode_nt1_3.jpg?direct }}
+==== More Links: ====
 https://www.thomann.de/gb/rode_nt1_kit.htm
+[[ee:hardware_available| Back to Hardware Available]]
+[[ee:audiolab| Back to Audio Lab Main Menu]]