Differences

This shows you the differences between two versions of the page.

--- ee:studio_default_inputs_outputs_configuration [2020/03/05 15:18] – 19923@students.hsrw
+++ ee:studio_default_inputs_outputs_configuration [2020/03/06 15:27] (current) – 19923@students.hsrw
@@ Line 1: / Line 1: @@
-====== Studio Default Inputs/Outputs Configuration ======
+===== Studio Default Inputs/Outputs Configuration =====
+==== Inputs ====
 The inputs are set as default in the following manner:
-              -	I/O Box Inputs connected to Focusrite Inputs 1 – 8, with same labeling.
+              *	[[focusrite_18i20|Focusrite Scarlet 18i20]] inputs 1 to 8, routed inside the isolated recording booth through the I/O Box input section, with same labeling.
-              - The Inputs cannot be controlled by the Focusrite Control panel, this has to be done in the DAW (i.e. Cubase)
+              * [[Rode NT1]] Mic connected to [[I/O Box]] Input 1.
+              * XLR cable connected to [[I/O Box]] Input 2, for a second microphone if needed.
+              * [[BSS Audio AR-133 Active DI Box]] No.1 connected to I/O Box Input 5.
+              * [[BSS Audio AR-133 Active DI Box]] No.2 connected to I/O Box Input 6.
+              * Two more BSS Audio AR-133 Active DI Boxes can be used (on storage), connect to [[I/O Box]] Input 7 and 8 if needed.
+The Inputs cannot be controlled by the Focusrite Control panel, this has to be done in the DAW (i.e. Cubase)
+==== Outputs ====
 The outputs are set as default in the following manner:
-              -	Focusrite 18i20 Monitor Outputs 1+2 (back panel) connected to the Yamaha HS5 speakers, left and right respectively.
+              *	[[focusrite_18i20|Focusrite Scarlet 18i20]] 1+2 monitor outputs (back panel) connected to the [[Yamaha HS5]] speakers, left and right respectively.
-              - Focusrite Outputs 3 to 10 connected to I/O Box inside the recording booth, connected to the output XLR sockets, with same labeling.
+              * [[focusrite_18i20|Focusrite Scarlet 18i20]] outputs 3 to 10, routed inside the isolated recording booth through the [[I/O Box]] output section, connected, with same labeling.
-              -	I/O Box Output 1+2 connected to ART HeadAmp 6 Pro to XLR main inputs, left and right respectively.
+              *	I/O Box outputs 1+2 connected to [[ART HeadAmp 6 Pro]] to XLR main inputs, left and right respectively.