ee:solarsimulator
This is an old revision of the document!
WaveLabs Solar simulator
Some notes to not forget them.
- Optimal distance to light source is 1,05m
- Chuck (black mesuring device) is to bealigned centered, pro tip: mark the position
- Software to control chuck temperature (not yet installed) from Oven Industrial COntrols
- Turn on vaccum by turnign all three levers
- copper plate can be cleaned from oxidization by steel wool
- fill factor is the area under the MPP in realtion to the maximum possible defined by Isc and Voc. 80-82% is good. Bad FF can be because of bad contacts.
Abbreviations:
- Isc - short circuit current
- Voc - open circuit voltage (woltage without current)
- MPP - maximum power point (a small blue cross in the graph)
- ETA - efficiency
- FF - Fill factor
ee/solarsimulator.1750758782.txt.gz · Last modified: by FKR@staff.hsrw